Single stroke solenoid
SLA 080x yyy

Our single-acting solenoids are available in different versions, designed for either pulling or pushing action.

The plunger must be returned to its original position using external force and is operated in zero-maintenance precision bearings, ensuring a long lifetime. It is important that force is drawn off axially.

Single stroke solenoid
SLA 070x yyy

Our single-acting solenoids are available in different versions, designed for either pulling or pushing action.

The plunger must be returned to its original position using external force and is operated in zero-maintenance precision bearings, ensuring a long lifetime. It is important that force is drawn off axially.

Single stroke solenoid
SLA 065x yyy

The force-current characteristics have enormous force capabilities and can be adapted to customer-specific demands. The axis is workable as a valve plunger or an M8 thread axis. Applications including water valves, water hydraulics, high pressure valves or other mechanical tasks with high power requirements. The mechanically and electrically robust construction guarantees a long lifespan and reliable operation, even in adverse environmental conditions.

For devices of this series, we offer extensive benefits even from medium lot sizes, like for example individual identification by serial number, with access to the inspection protocol.

Dimensions: 65 x 65 mm in two power levels: 60 W and 19 W. The technical data can be obtained from the attached table or diagram.

Reversal stroke solenoid
SLA 062E yyy B

Reverse stroke solenoids are effective at both ends. The stroke end position of the plunger in a solenoid system is also the starting position of the stroke in another solenoid system.

In this version, the plunger does not have to be reset using mechanical force. The plunger is operated at both ends in zero-maintenance precision bearings, ensuring a long lifetime. It is important that force is drawn off axially. Solenoids can be supplied with free cable ends (with DIN VDE 0470/EN 60529 – IP20 protection), or with DIN 43650 connectors (with DIN VDE 0470/EN 60529 – IP54 protection).

Double stroke solenoid
SLA 062E yyy A

Double acting solenoids are magnets where electromagnetic forces move the armature from the home position to one of the two stroke end positions.

Return to the home position is usually carried out by external forces. On both sides, the armature is guided on maintenance-free precision bearings, ensuring a long working life. An axial power take off is important in this context. The solenoids can be supplied with free cable ends, protection class according to DIN VDE 0470/EN 60529 – IP20, or with plug connectors according to DIN 43650, protection class DIN VDE 0470/EN 60529 – IP54.

Single stroke solenoid
SLA 062x yyy

The direct acting solenoid SLA 062 is a solid solenoid with plunger. The plunger is guided in highly wear-resistant maintenance-free precision bearings on both sides.

Housing surfaces are corrosion protected. The plunger is chemically nickel-plated. The stroke movement takes place from the stroke starting position to the stroke stop position by electromagnetic forces, whereas the reset is accomplished by a pressure spring. The force transfer should be in axial direction only. Either lateral or front mounting via threaded holes is possible.

Solenoids can be supplied with free cable ends (with DIN VDE 0470 / EN 60529 – IP20 protection), or with DIN 43650 connectors (with DIN VDE 0470 / EN 60529 – IP54 protection).

Single stroke solenoid
SLA 034E yyy

The direct acting solenoid SLA 034E is a solid solenoid with plunger. The plunger is guided in highly wear-resistant maintenance-free precision bearings on both sides.

Housing surfaces are corrosion protected. The plunger is chemically nickel-plated. The stroke movement takes place from the stroke starting position to the stroke stop position by electromagnetic forces, whereas the reset is accomplished by a pressure spring. The force transfer should be in axial direction only. Either lateral or front mounting via threaded holes is possible.